Skip to content
Guangzhou Airport Map: Terminals, Transfers & Layout (CAN)

Guangzhou Airport Map: Terminals, Transfers & Layout (CAN)

The quick version

Find your way around Guangzhou Baiyun Airport (CAN) with a terminal layout overview, transfer routes between terminals, and tips to avoid wrong-terminal mistakes.

7 min readBy Asian Airports Editorial
Share this article:
On this page

Last updated November 2026: this guangzhou airport map guide explains how Guangzhou Baiyun International Airport (CAN) is laid out across Terminals 1, 2 and 3. It covers terminal layout, transfers and wayfinding, not flight destination maps or city route maps. For the full overview, start with our complete Baiyun airport guide.

Featured image: Keiichi Yasu, CC BY-SA 2.0, via Wikimedia Commons.

Guangzhou Baiyun Airport Map at a Glance

Guangzhou Airport Map, China — 1
Photo: Jacky Cheung, CC BY-SA 4.0, via Wikimedia Commons.

Guangzhou Baiyun International Airport uses the IATA code CAN and the ICAO code ZGGG. It sits in the Baiyun and Huadu districts of Guangzhou. It opened on August 5, 2004, and replaced the earlier airport of the same name, which had operated since 1933. Three terminals matter to travelers today: Terminal 1, Terminal 2 and Terminal 3. Most journeys come down to two questions. Which terminal is your flight in, and how do you reach it from the metro, a hotel or another terminal? In a taxi or at an information desk, show the Chinese name 广州白云国际机场 on your phone. Locals also say 白云机场. For the live layout, use the maps on the official airport site.

  • Airport name: Guangzhou Baiyun International Airport
  • Codes: CAN (IATA) and ZGGG (ICAO)
  • Location: Baiyun and Huadu districts, Guangzhou
  • Terminals: T1, T2 and T3
Guangzhou Airport Map, China — 2
Photo: CRCHF, CC BY-SA 3.0, via Wikimedia Commons.

Terminals Explained

Terminal 1 and Terminal 2 are the established terminals. Each has concourse piers that run out from the main building toward the gates. Terminal 2 also has a ground transportation center. Metro Line 3 serves the terminals through two stations: Airport North beneath Terminal 2 and Airport South beneath Terminal 1. Airport South service has been affected by the Terminal 1 renovation since May 2026, so use Airport North unless the metro operator says otherwise. Terminal 3 is the newest addition and went into operation on October 30, 2025, according to RTHK. Its transportation center includes a rail transit hub on two underground levels. A Baiyun district government page describes five platforms and 12 tracks, designed for intercity and high-speed rail, including the Guangcong and Guangzhou-Zhuhai routes, with Guangzhou Railway Station or Baiyun Station within 20 minutes. Terminal 3 details move faster than printed maps do. Treat the airport's own pages as the reference for which services run now.

Tip

Terminal 3's rail hub is built for intercity and high-speed trains and has no direct metro link, so use Airport South at Terminal 2 for the metro.

Guangzhou Airport Map, China — 3
Photo: Jacky Cheung, CC BY-SA 4.0, via Wikimedia Commons.

How to Find Your Terminal

Terminal assignments can change between seasons and even between days. Do not assume that one terminal serves every flight. Start with your e-ticket or booking confirmation, which usually names a terminal. Next, open your airline's app or website. A carrier such as China Southern Airlines shows flight details under its own booking tools. Then compare that against the departure and arrival boards on the airport site. If two sources disagree, go with the airport's flight information screens. Do this before you leave your hotel, not at the curb. Signs inside the airport are bilingual in Chinese and English. A terminal number on your ticket is far more useful than an airline name when you ask staff for directions.

Guangzhou Airport Map, China — 4
Photo: Jacky Cheung, CC BY-SA 4.0, via Wikimedia Commons.
  • Read the terminal on your ticket or booking confirmation.
  • Cross-check it in your airline's app.
  • Match it again against the airport's flight information.
  • Re-read the gate on the screens after you clear security.

Getting Between Terminals

Guangzhou Airport Map, China — 5
Photo: Sun8908, CC BY-SA 4.0, via Wikimedia Commons.

Moving between terminals is where most delays start. Pullman Guangzhou Baiyun Airport runs a complimentary shuttle every 30 minutes. It takes about 3 minutes to reach Terminal 2 gate 46 and connects directly to Terminal 3 gate 66. That shuttle is the hotel's own service, so it fits guests, not every traveler. For other transfers, follow the ground transportation signs and ask at an airport information desk. Cross-terminal routes depend on whether you are landside or airside. Landside means before security. Airside means past it. Changing terminals may mean re-clearing security, and sometimes immigration. Entry and transit rules vary by nationality, so check the National Immigration Administration before you book. Planning a connection? Our Guangzhou layover guide covers timing in more detail.

Good to know

Pullman shuttle runs every 30 minutes to Terminals 2 and 3, but check-in does not start until 2:00 PM, so early arrivals may need luggage storage.

JourneyWhat to followConnectorMain trap
Gate to gate, same terminalGate numbers on your boarding passWalk along the concourse piersGate changes; recheck screens
Terminal 2 to the metroGround transportation signsT2 ground transportation center to Airport North stationGoing to the wrong terminal first
Pullman hotel to T2 or T3Hotel shuttle signsComplimentary shuttle every 30 minutes; 3 minutes to T2 gate 46; direct to T3 gate 66Missing the 30-minute interval
Between T1, T2 and T3Airport signs and information desksAsk on the dayLandside versus airside; security re-check
Guangzhou Airport Map, China — 6
Photo: Sun8908, CC BY-SA 4.0, via Wikimedia Commons.

From Terminal to City and Transit

Sponsored

Airport North metro station, beneath Terminal 2, is the rail link tied to the Terminal 2 ground transportation center. Check line and timetable details on the Guangzhou Metro site. For taxis, buses and costs, see our airport to city center guide. The Pullman lists Guangzhou East railway station as 40 km away. That is about a 45-minute drive, and a shuttle can be arranged on call at an additional charge. Terminal 3's rail hub is meant to put Guangzhou Railway Station or Baiyun Station within 20 minutes.

Amenities on the Map

Guangzhou Airport Map, China — 7
Photo: Tim Wu, CC BY-SA 4.0, via Wikimedia Commons.

Lounges, hotels and storage sit around the terminals rather than in one place. Our Baiyun lounge guide covers lounge options. For a bed nearby, see airport hotels near CAN. Pullman Guangzhou Baiyun Airport is at No.2 Yiheng Road, Airport Avenue, Huadu. Check-in starts at 2:00 PM and check-out is until 12:00 PM. A VIP Security Check Channel can be arranged with a reservation of Executive Room type or above. Short waits between flights may suit a transit hotel stay better. Need to drop bags first? Read about luggage storage at the airport.

Common Mistakes and Quick Tips

Sponsored

Most layout errors are avoidable with a few habits. Screenshot your terminal and gate before you enter the airport. Allow extra time whenever a journey crosses terminals or moves from landside to airside. Avoid old third-party diagrams. One airport diagram aggregator still shows a layout page with a copyright range ending in 2017. A CAAC airport chart dated December 2024 exists on Wikimedia Commons, but it is a chart, not a live terminal guide. With time to kill, see things to do at Guangzhou airport.

  • Wrong terminal: match it twice on the day of travel.
  • One terminal for everything: do not assume it.
  • Outdated maps: use the airport's own channels first.
  • Terminal changes: plan for security, and for immigration if you cross landside.

Frequently Asked Questions

How do I get from Terminal 3 to Terminal 2 at Guangzhou Airport?

Follow the airport's inter-terminal signs, or ask at an information desk. Pullman Guangzhou Baiyun guests can use the hotel shuttle, which connects T3 gate 66 and T2 gate 46. Whether you must clear security again depends on whether you are landside or airside.

How far is Guangzhou airport from the city centre?

Distance depends on which part of the city you mean. The Pullman lists Guangzhou East railway station as 40 km away, about a 45-minute drive. See our airport-to-city guide for options.

What is the name of the airport in Guangzhou?

Guangzhou Baiyun International Airport serves the city. Its IATA code is CAN and its ICAO code is ZGGG. In Chinese it is 广州白云国际机场.

Notes for your next connection

Optional updates when our airport guides change.

No spam. Unsubscribe anytime.

Continue reading

More guides you'll find useful